Monday, 2 September 2013

Space Marine Assault Terminators

Picking up from my previous post, it's finally time to get my Assault Terminators finished! :D As mentioned last time the models were prepped and magnetized to keep all weapon options available... All that was left was to paint them:D

Mind, this has still taken me almost 2 months on and off...

Following my usual Ultramarines paint-scheme the five models were undercoated with Chaos Black and the base covered in a thin layer of Scorched Brown...

The entire body was then covered in Macragge Blue, while the scenic rocks on the base were coloured with Dawnstone and then drybrushed with Administratum Grey:

Finally all metal areas are paitned with Boltgun Metal

All to-be-white elements were painted grey (Administratum Grey) to make proper covering easier later on

For the helmets the lenses were first painted with Red Gore, while the remainder was painted first grey and then Skull White, leaving recessed areas grey for shadows:

Time to glue the helmets on! :D

Time for the weapons which were also based with Macragge Blue...

The metal parts are again painted Boltgun Metal and white elements as on the armour... Gold elements are first covered with Calthan Brown followed by Shining Gold.:



With all areas now covered in their correct colours and any mistakes cleaned up, its time for shading with a blue wash. This is followed by some line-highlights, first fairly thick liens with Ultramarine Blue:

followed by thin selected highlights of a 50:50 mix of Ultramarine Blue and Administratum Grey:

To finish off, the bases are drubrushed with Calthan Brown and Bleached Bone and static grass is applied in small tuffs...

Another result which I'm very proud of! I'm really happy with my paint-scheme and the end-result :) Now if I could only speed up my painting... Below I've added some close-ups of all 5 beasts, enjoy! :D





Monday, 29 July 2013

WIP Magnetising Assault Terminators weapons and Quad-cannon

So this post is about something slightly different than my normal painting posts. Usually prepping models is pretty straight forward (although sometimes time-consuming), but sometimes you get models with multiple weapon options and miniatures being as pricey as they are, you wanna keep your options open. Enter magnetisation!

The idea is simple, add small (but strong) magnets to your model and you have the option to exchange parts freely depending on what you want to use the model for. The necessary tools are quite straight forward, as all you need is plenty of magnets (rare-earth magnets for proper strength), some superglue and a drill in the appropriate size. I also opted to get a small hand-vice for better drilling. All items are readily available on Ebay for a few quid.  


The main reason for getting started on this project was to magnetise the weapons on my Assault Terminators as they come with both a Stormshields + Thunderhammer load-out or dual Lightening Claws, both which are viable options depending on opponents and other units in the army. 

After having removed mold-lines etc from the models i glued the bodies together as normal and then drilled a 3 mm hole in each shoulder. Testing the size of the hole with a magnet before gluing is a must as you want it flush with the surface. Also, be sure to watch the polarity of the magnets! I marked one end of a rod-magnet and made sure the inserted magnet always stuck to my rod.... After adding a drop of superglue you have to be quite fast and precise with positioning the magnet as it dries almost instantly. 
Finally the torsos will look something like this...


Same procedure for arms containing claws, shields and hammers..



After leaving the models to dry completely for an hour or so you basically have 10 models for the price of 5 :D




 

Now the models are ready to be painted, which I've been working on for quite many weeks now. Expect another post on this soon :D

----------------------------------------------------------------------------------------------

Secondly, I also recently bought the Aegis defense line, which is turning our to be an almost must-have in larger 6'th edition games. Apart from the wall itself, the model also comes with the very powerful Quad-Cannon which is great for sniping flyers and other pesky vehicles from the distance. As the weapon is turret-mounted I opted to magnetise it to allow it to spin 360° without feeling flimsy.


After putting the parts of the gun together I took a piece of steel plate and cut it to fit inside the housing. I then glued a 5 mm magnet to a steel nut to get the correct distance from plate to gun.


The plate was super-glued to the mount and the nut to the gun...


And voila! A turret-mounted gun that can spin 360° and now has some grip so it wont spin randomly around in its socket. Furthermore, the added weight of the metal plate makes the whole gun feel more stable on rough surfaces...


Using magnets in models are easy, fast and cheap and really adds to the value of our expensive models. Definitely something I will be using a lot in the future :D

Monday, 24 June 2013

Space Marine Land Speeder

With a ton of models ready-build and just sitting in my cabinet waiting to get painted, it's getting harder and harder to decide which one to paint next. Clearly I need to start spending more time on painting and less on buying, building and modifying models :P

With the new Space Marine codex rumored to come out in September it would be great to have all my current units painted and ready before then, but that will require me to paint 5 Terminators, 10 Tactical Marines, 1 Drop Pod, 1 Rhino, 1 Aegis Defense Line + Quad-cannon and furthermore build and paint 7 Sternguard Veterans. But with the danish summer you never know how much time you get inside :D

For my current project I however decided to finally paint my Land Speeder, which have been sitting around for quite many months...


I decided to keep the two marines driving the thing out until I have the interior and them properly painted, as I hate looking "into" a model and see spots I can no longer reach and paint... As usual the model was spray coated Chaos Black, followed by Macragge Blue on the armor parts and Leadbelcher on the metal areas.

I then painted up the bald marine head along with their golden aquillas (chest-eagle). The remaining metal elements on the vehicle were also painted...

I got a little carried away with colours on the control panel, but in the end I think it looks quite nice. Even the stern Ultramarines surely like big coloured buttons :P All elements are glazed using Gloss Varnish to give them a shiny finish.

 The seats were painted a lovely Scorched Brown to give them an exclusive leather-look, and most gold elements were pre-painted with Calthan Brown to make the gold colour stick better.

I then proceeded to shade the entire vehicle and both marines using Drakenhof Nightshade. The metal areas were washed with Bedab Black. Both the underslung gun and the pintle-mounted one were painted with Leadbelcher and Dwarf Bronze. To ensure a nice crisp and white Ultramarines logo, I first painted it with Dawnstone.

And then Skull White :)

Finally, the two marine models were mounted in the vehicle...

To finish of the model I did some extensive highlighting. The metal areas were highlighted with thin strokes of Chainmail and the armored parts with Ultramarine Blue. To add an extra finish a second highlight was added with a 1:1 mix of Administratum Grey and Ultramine Blue. Below is a bunch of pictures of the finished result, which I, once again, am really proud off :D







While I have enjoyed painting this model I think I like painting smaller models more (but I still have a Drop Pod and a Rhino to do, so I might change my mind).
Now all that remains is to decide what to paint next, that is, after two weeks on Gran Canaria :D Either my Assault Terminators or my Rhino.We shall see...